測繪量具
發布時間:2019-05-23 11:20:35來源:本站原創 點擊量:

量具 科技名詞定義
中文名稱:量具 英文名稱:measuring tool 定義:以一定形式復現量值的計量器具。
所屬學科: 機械工程(一級學科) ;量具與量儀(二級學科) ;量具(三級學科)
本內容由全國科學技術名詞審定委員會審定公布 目錄[隱藏]
基本信息
用途與分類1、標準量具
2、通用量具
3、專用量具
量具量儀中英文對照匯總
******品牌基本信息
用途與分類 1、標準量具
2、通用量具
3、專用量具
量具量儀中英文對照匯總
******品牌
[編輯本段]基本信息
拼音:[liáng jù]量具英文:[measuring tool]
[編輯本段]用途與分類
1、標準量具
指用作測量或檢定標準的量具。如量塊、多面棱體、表面粗糙度比較樣塊等。量具2、通用量具
也稱******量具。一般指由量具廠統一制造的通用性量具。如直尺、平板、角度塊、卡尺等。
3、專用量具
也或稱非標量具。指專門為檢測工件某一技術參數而設計制造的量具。如內外溝槽卡尺、鋼絲繩卡尺、步距規等量具是以固定形式復現量值的測量器具,特點如下 1、本身直接復現了單位量值,即量具的標稱值***是單位量值的實際大小,如量塊本身***復現了長度量的單位。 2、在結構上一般沒有測量機構,沒有指示器或運動著的元部件。如量塊只是復現單位量值的一個實物。 3、由于沒有測量機構,如不依賴其他配用的測量器具,***不能直接測出被測量值。例如量塊要配用干涉儀、光學計。因此它是一種被動式測量器具.
[編輯本段]量具量儀中英文對照匯總
1.刀口型直尺:knife straigjht edge 2.刀口尺: knife straigjht edge 3.三棱尺three edges straigjht edge 4.四棱尺four edges straigjht edge 5.條式和框式水平儀bar form and square levels 6.合像水平儀imaging level meter 7鑄鐵平板cast iron surface plate 8.巖石平板granite surface plate 9.鑄鐵平尺cast iron straigjht edge 10.鋼平尺和巖石平尺steel and granite straigjht edge量具11.圓度儀roundness measuring instrument 12.電子水平儀electronic level meter 13.表面粗糙度比較樣塊鑄造表面roughness comparison specimens cast surface 14.表面粗糙度比較樣塊磨、車、銑、插及刨加工表面roughness comparison specimens-ground,turned,bored,milled,shape and planed 15.表面粗糙度比較樣塊電火花加工表面roughness comparison specimens spark-erostion machining surfaces 16.表面粗糙度比較樣塊拋光加工表面roughness comparison specimens pollshed surfaces 17.接觸式儀器的標稱特性 18.輪廓profiles 19.軌跡輪廓traced profile 20.基準輪廓reference profile 21.總輪廓total profile 22.原始輪廓primary profile 23.殘余輪廓residual profile 24.觸針式儀器stylus instrument 25.感應位移數字存儲觸針式量儀displacement sensitive,digitally storing stylus instrument 26.觸針式儀器的部件stylus instrument components 27.測量環measurement loop 28.導向基準renfence guide 29.驅動器drive unit 30.測頭(傳感器) probe(pick-up) 31.拾取單元tracing element 32.針尖stylus tip 33.轉換器transducer 34.放大器amplifier 35.模/數轉換器analog-to-digital converter 36.數據輸入data input 37.數據輸出data output 38.輪廓濾波和評定profile filtering and evaluation 39.輪廓記錄器profile recorder 40.儀器的計量特性metrological characteristics of the instrument 41.靜測力的變化change of static measuring force 42.靜態測力static measuring force 43.動態測量力dynamic measuring force 44.滯后hysteresis 45.測頭的測量范圍transmission function for the sine waves 46.儀器的測量范圍measuring range of the instrument 47.模數轉換器的量化步距quantization step of the ADC 48.儀器分辨力instrument resolution 49.量程分辨力比range-to-resolution ratio 50.測頭線性偏差probe linearity deviation 51.短波傳輸界限short-wave transmission limitation 52.輪廓垂直成分傳輸vertical profile component transmission1 53表面粗糙度比較樣塊拋丸、噴砂加工表面roughness comparison specimens shot blasted and blasted surfaces 54產品結構幾何量計術規范(GPS)geometrical product specifications(GPS) 55表面結構surface texture 56接觸式儀器的標稱特性nominal characteristics of contact instruments 57公法線千分尺micrometer for mearsuring root tangent lenghths of gear teeth 58******允許誤差maximum permissible error 59圓柱直齒漸開線花鍵量規gauges for straight cylindrical involute splines 60齒厚游標卡尺Gear tooth vernier calipers 61齒輪漸開線樣板the involute master of gear 62齒輪螺旋線樣板the helix master of gear 63矩形花鍵量規gauges for straight–sided splines 64測量蝸桿master worm 65******測齒儀universal gear measuring instrument 66******漸開線檢查儀universal involute measuring instrument 67齒輪齒距測量儀gear circular pictchmeasuring instrument 68******齒輪測量機Universal gear measuring machine 69齒輪螺旋線測量儀gear helix measuring instrument 70便攜式齒輪齒距測量儀manual gear circular pitch measuring instrument 71便攜式齒輪基節測量儀manual gear base pitch measuring instrument 72立式滾刀測量儀vertical hob measuring instrument 73齒輪雙面嚙合綜合測量儀Gear dual-flank measuring instrument 74齒輪單面嚙合整體誤差測量儀Gear single-flank meshing integrated error measuring instrument 75梯形螺紋量規gauges for metric trapezoidal screw threads 76工作螺紋量規work gauges for metric trapezoidal screw threads 77校對螺紋量規check gauges for metric trapezoidal screw threads 78.梯形螺紋量規型式與尺寸Types and dimensions of metric trapezoidal screw threads 79.普通螺紋量規型式與尺寸Types and dimensions of gauges purpose screw threads 80.非螺紋密封的管螺紋量規Gauges for pipe threads prcessure-tight joints are not made on the threads 81.螺紋千分尺Screw thread micrometer 82.******允許誤差maximum permissible error 83.間隙螺紋量規Clearance screw gauge 84.量針Bar gauge 85.螺紋樣板Screw thread template 86.用螺紋密封的管螺紋量規Gauges for pipe threads where pressure-tight joints are made on the threads 87.刀具預調測量儀精度Accuracy of the presetting instrument 88.薄膜式氣動量儀Membrane type pneumatic measuring instrument 89.光柵線位移測量系統Grating linear displacement measuring system 90.光柵角位移測量系統Grating angular displacement measuring system 91.磁柵線位移測量系統Magnet-grid linear displacement measuring system 92.量塊附件Accessories for gauge blocks 93.V形架Vee blocks 94.比較儀座Comparator stand 95.磁性表座Magnetic stand 96.******表座Universal stand for dial indicator